The ST Blog (audio version)
The audio versions of the posts we publish on The ST Blog. Listen at your leisure and learn more about what makes technologies great and innovations meaningful. Get more from technology to get more from life with STMicroelectronics.
Episodes
#84 (2025) Matter 1.5 and ST25DA-C: Commissioning with NFC now a reality with the 1st secure compatible device
A whole new type of interaction with Matter 1.5 products. We launched the ST25DA-C, the first secure NFC device compatible with commissioning over NTL (NFC Transport Layer).🔍 Learn more on the #STBlog: https://blog.st.com/matter-commissioning-st25da-c/
#83 (2025) How ST Helps Pozyx Power Industrial RTLS with Smaller, Smarter, Longer-Lasting Technology
Realiable location data is a game-changer. Pozyx, a Belgian company powered by ST components, delivers precise positioning solutions that are trusted by leading manufacturers and logistics operators.🔍 Learn more on the #STBlog: https://blog.st.com/pozyx-power-industrial/
#81 (2025) #STM32Summit: New STM32WL3R for remote control application, the first STM32WL3 to support the 315 MHz band
STM32WL3R is the first STM32WL3 designed with remote-control applications in mind. It comes with more wake-up pins, even lower power modes, and support for a new frequency band used for this use case. 🔍 Discover more on the #STBlog: https://blog.st.com/stm32wl3/
#80 (2025) #STM32Summit: STM32C0, TouchGFX, and a knob display show why entry-level graphics are showing up everywhere
Entry-level graphics running on mainstream microcontrollers are among the most popular trends in embedded systems. During the STM32 Summit, we showcased a smart knob with a 240 x 240 display running at 60 FPS on an STM32C0.🔍 Learn more on the #STBlog: https://blog.st.com/entry-level-graphics/
#79 (2025) #STM32Summit: STM32 AI Model Zoo, the largest collection of AI models for MCUs now supports PyTorch
Extensive collection of AI models. The STM32 AI Model Zoo, sorted by use cases, offers more than 140 ready-made models for vision, audio, and sensing.🔍 Learn more on the #STBlog: https://blog.st.com/modelzoo/
#78 (2025) #STM32Summit: STM32V8, The 1st 18-nm Cortex-M85 with PCM exceeds 5,000 points in CoreMark, A new general-purpose flagship with AI in mind
Performance levels enabling next-gen applications. The STM32V8 is the first Cortex-M85 microcontroller with 4 MB of embedded phase-change memory built on the most advanced 18-nm process technology.🔍 Learn more on the #STBlog: https://blog.st.com/stm32v8/
#77 (2025) Light into data: How silicon photonics is powering the AI data center revolution
In today’s data-driven world, the demand for higher data transfer, speed, performance and energy efficiency is growing at an unprecedented pace. Silicon photonics combines the speed of light with the scalability of silicon manufacturing to meet these demands.🔍 Discover more on the #STBlog: https://blog.st.com/data-silicon-photonics-ai/
#76 (2025) ISM6HG256X and IIS2DULPX: new industrial sensors with ML core, high-g accelerometer, and ultra-low power consumption
The ISM6HG256X and IIS2DULPX set new limits. The ISM6HG256X is the first on the market to reach 105 ºC, while the IIS2DULPX offers a ±16 g range, with a finite-state machine and a machine-learning core that supports adaptive self-configuration.🔍 Discover more on the #STBlog: https://blog.st.com/ism6hg256x-iis2dulpx/
#75 (2025) Update: Join the webinar after the technical deep dive into ST’s new 5MP CMOS image sensors
Making sensors smarter with 3D stacking. This technology allows embedding additional circuitry and on-chip processing directly within the sensor, creating smarter image sensors.🔍 Discover more on the #STBlog: https://blog.st.com/cmos-image-sensors/
#74 (2025) Traction Inverter: Keys to understanding the inverter, the traction, and why X-in-1 solutions are increasingly popular
How to design great traction inverters? ST offers an evaluation board, the EVALSTGAP4S, which significantly hastens the development of a proof of concept.🔍 Discover more on the #STBlog: https://blog.st.com/traction-inverter/
#72 (2025) 800 V HVDC for AI data centers: How ST squeezed 12 kW into a smartphone-sized power delivery board
NVIDIA validated ST’s 12 kW power delivery proof-of-concept board, effectively moving into production testing. The GPU maker is even showcasing a complete prototype designed by ST at OCP 2025, the summit organized by the Open Compute Project.🔍 Learn more on the #STBlog: https://blog.st.com/800-v-hvdc-data-center/
#73 (2025) Update: Singapore’s largest industrial district cooling system, Now operational at ST’s AMK TechnoPark
As promised in 2022, the District Cooling System at ST’s Ang Mo Kio (AMK) TechnoPark is now operational. This launch is a critical milestone in our goal to achieve carbon neutrality by 2027.🔍 Discover more on the #STBlog: https://blog.st.com/district-cooling-system/
#71 (2025) A new generation of DC-DC converters: the DCP family and the latest DCP3601
ST introduces the DC+ (DCP) family, a new generation of DC-DC converters. They focus on compactness, scalability, and high-voltage capability to meet the needs of modern applications.🔍 Learn more on the #STBlog: https://blog.st.com/new-dcp-family/
#70 (2025) ST AIoT Craft 1.2, the first cloud solution for ST’s Machine Learning Core improves sharing and shares new improvements
ST launched version 1.2 of ST AIoT Craft, the first online tool that helps program ST MEMS sensors equipped with a machine learning core (MLC) to run inference operations. 🔍 Learn more on the #STBlog: https://blog.st.com/st-aiot-craft/
#69 (2025) OBC: The 3 challenges plaguing modern on-board chargers and how a whitepaper points to the solutions
Have on-board chargers (OBC) reached a limit? ST released a white paper to help guide engineers working on this problem and others.🔍 Discover more on the #STBlog: https://blog.st.com/obc-3-challenges/
#68 (2025) Intelligent Power Switches (IPS): The only way to do right by them is to have a holistic approach
Looking beyond Intelligent Power Switches (IPS). These tiny devices have enormous consequences when it comes to power conversion, protection, and overall electrification of vehicles. It’s for this reason that ST offers eDesignSuite, a design and simulation tool that reduces friction during development by making circuit design more intuitive.🔍 Discover more on the #STBlog: https://blog.st.com/intel
#67 (2025) TouchGFX 4.26: After emulated framebuffers, ST brings quality-of-life improvements
What’s new in TouchGFX 4.26? It includes UI tweaks to help with repetitive or habitual tasks, like copying typographies or reordering and cloning interactions. 🔍 Discover more on the #STBlog: https://blog.st.com/touchgfx/
#66 (2025) OpenSTLinux 6.1, M33-TD and all the ways ST helps safeguard MPUs
We launched OpenSTLinux 6.1. It broadens the impact that microprocessors have on systems run by microprocessors, thanks in part to the new M33-TD support.🔍 Discover more on the #STBlog: https://blog.st.com/openstlinux/https://blog.st.com/openstlinux/
#65 (2025) NanoEdge AI Studio v5, 1st AutoML tool with Synthetic Data Generation
NanoEdgeAI Studio v5 is the first AutoML tool for STM32 microcontrollers capable of generating anomaly data out of typical logs, thanks to a new feature we call Synthetic Data Generation. 🔍 Discover more on the STBlog
#64 (2025) Living on the Edge: How edge AI is powering faster, smarter and safer technology
Edge AI is transforming how intelligence is built into devices by processing data locally instead of on the cloud. This results in faster performance, stronger security and greater efficiency across industries – from healthcare to consumer electronics to smart infrastructure. Learn how “tiny edge” systems are driving this shift and what’s next. ➡️ Discover more on the STBlog
#63 (2025) Train like a pro: smart sensors in sports and healthcare elevate performance and wellbeing
Discover more on the STBlog
#62 (2025) GPS-Buddy RFID-Tag and ST’s LIS2DUX12: Let’s talk about the new era of tracking assets and safety monitoring
What does asset tracking really mean? The GPS-Buddy RFID-Tag, from the company GPS-Buddy, can provide so much more information than just a location on a map. 🔍 Discover more on the STBlog
#61 (2025) PerCV.ai: How a vision AI platform and the STM32N6 can turn around an 80% failure rate for AI projects
Why do so many AI projects not work? The vision AI platform PerCV .ai from Irida Labs, a member of the #STPartnerProgram, enables companies to deploy AI applications by capturing and managing data, training models, and optimizing algorithms to run on STM32 devices. 🔍 Discover more on the STBlog
#60 (2025) The Qualcomm AMR Reference Platform driven by ST Technology
The Qualcomm AMR is powered by Qualcomm’s Aikri System-on-Module (SoM) and ST advanced motion control and sensing technologies. It is equipped with a 360-degree vision system, LiDAR sensors, and AI/ML processing and is compatible with ROS2 and Linux. 🔍 Discover more on the STBlog
#59 (2025) XRP: Robotics for all, or how an LSM6DSOX guides new generations to embedded systems engineering
Reach a broad audience and be relevant to all experience levels. To develop the XRP platform, SparkFun Electronics, Inc. selected devices that were “easy to use” but still powerful, like the LSM6DSOX.Discover more on the STBlog
#58 (2025) Why does it MATTER? Understanding the universal protocol that’s making smart homes even smarter
Today’s smarthome devices are fragmented, but they are set all start talking to each other, thanks to Matter.Discover more on the STBlog
#57 (2025) STM32CubeProgrammer 2.20: Check out the new MCU features supported and a big welcome to Apple silicon
STM32CubeProgrammer 2.20 is the first version of the ST tool to natively support Apple silicon Macs, to offer Japanese and Chinese localization, and greatly improve incremental update programming. 🔍 Learn more on the STBlog
#56 (2025) From BCD to Satellite Radio: ST’s Innovation Journey Across Three IEEE Milestones
In June 2025 ST received its third IEEE plaque, which recognizes the system of integrated circuits that made Satellite Digital Radio a commercial and humanitarian reality. 🔍 Discover more on the STBlog
#55 (2025) DH electronics: SoM maker relies on STM32MP1, STM32MP2 & the open source community to make a difference
Want to create a gateway with a cost-effective microprocessor? DH electronics came up with the DHCOR STM32MP13, taking the ST MPU and putting it in an industrial-grade production-ready system.🔍 Discover more on the STBlog
#54 (2025) PLT-300A: an ambassador on the assembly line to flash, test, and track STM32 MCUs
🕹️ Can a test station on an assembly line be as simple and efficient as pressing a green button? That’s precisely the promise behind the PLT-300A from @Blue Clover, a member of the ST Partner Program.🔍 Discover more on the STBlog
#53 (2025) X-CUBE-PQC: Why post-quantum cryptography matters already and how STM32 embedded systems are ready for future attacks
X-CUBE-PQC ensures STM32 microcontrollers are ready to pass the latest security certifications.Discover more on the STBlog
#52 (2025) Beyond the Screen: envisioning a giant leap forward for smartphones from physical objects to immersive experiences
📱 Explore how smartphones are moving from physical objects to immersive experiences 🔍 ➡️Discover more on the STBlog
#51 (2025) Quantropi brings post-quantum cryptography to STM32 just in time to face new threats
👀 Is your STM32 device quantum-proof? Quantropi, a member of the ST Partner Program, provides an end-to-end quantum security platform to protect STM32 systems from quantum attacks.🔍 Discover more on the STBlog # STPartnerProgram #STAuthorizedPartner
#50 (2025) Cars That Talk: Reimagining driving with RADAR, LIDAR and Smart Connectivity
🚘 Cars are getting smarter with RADAR, LiDAR & V2X technology. These connected systems improve #safety and prevent accidents.Discover more on the STBlog
#49 (2025) eDesignSuite Power Management Design Center: 3 new features and a ton of possibilities
A new way to choose responsible products, simulate higher loads, and reduce the design phase of power circuits. The eDesignSuite Power Management Design Center includes a power supply and LED lighting design tool, a digital workbench, and a power tree designer. 🔍 Learn more on the STBlog
#48 (2025) eXtremeDB: All the reasons why embedded systems need a database and how to go about it
McObject developed eXtremeDB, an embedded database management system, and makes it accessible by providing APIs in a wide range of programming languages, including C, C++, C#, Rust, Lua, and Python. #STPartnerProgram #STAuthorizedPartner 🔍 Learn more on the STBlog
#47 (2025) X-LINUX-QT and how collaboration brings longevity, performance, and accessibility to UIs on STM32 MPUs
X-LINUX-QT brings Qt 6 to our community. Developers gain greater 2D and 3D capabilities on our MPUs thanks to new optimizations. 🔍 Learn more on the STBlog
#46 (2025) 5th Gen Human Presence Detection (HPD), an ST turn-key solution with the VL53L8CP multi-zone ToF sensor and AI
Protect privacy and battery life with ST’s fifth-generation Human Presence Detection (HPD). The technology is based on our VL53L8CP Time-of-Flight sensor and a machine learning algorithm capable of running on low-power microcontrollers. 🔍 Learn more on the STBlog
#45 (2025) 800 V HVDC for AI data centers: How ST squeezed 12 kW into a smartphone-sized power delivery board
NVIDIA’s 800 V HVDC architecture and ST’s power distribution board represent a new era for data centers. Thanks to our expertise and portfolio, we can very easily reuse our work on power converters and fit different power requirements.🔍 Learn more on the STBlog
#44 (2025) Our Role in Vision 4Rescue at VivaTech 2025
At VivaTech 2025, the Software République presented Vision4rescue, a project integrating ST’s solutions to enhance efficiency and security in emergency situations. 🔍 Learn more on the #STBlog: https://blog.st.com/vision-4rescue/
#43 (2025) AEK-MOT: 2 new challenges facing motor control applications in cars and what we are doing to address them
ST has multiplied the AutoDevKit development boards for motor control applications in cars. There are general systems like the AEK-MOT-2DC40Y1 for driving three DC motors, the AEK-MOT-3P99081 for brushless motors, and the AEK-MOT-SM81M1 for stepper motors. 🔍 Learn more on the #STBlog:https://blog.st.com/aek-mot-motor-control/
#42 (2025) STEVAL-KITXCB: the 1st step to Ki cordless kitchen appliances powered by cooktops and countertops
More than 92% efficiency. The STEVAL-KITXCB uses a half-bridge topology and ST’s IGBTs with a trench gate field-stop to reduce switching losses.🔍 Learn more on the #STBlog: https://blog.st.com/steval-kitxcb-ki-cordless/
#41 (2025) ST67W611M1: The best Wi-Fi/Bluetooth combo for STM32 unlocks new IoT potential
ST and Qualcomm Technologies announced the mass market availability of the ST67W611M1, a Wi-Fi co-processor stemming from our strategic collaboration, compatible with Wi-Fi 6 and Bluetooth 5.4. 🔍 Learn more on the #STBlog:https://blog.st.com/st67w611m1/
#40 (2025) Inside Out: The Dual Frontier of In-Cabin Monitoring in Road Safety
Bringing in-cabin driver and occupant monitoring systems together into one unified intelligence network is central to the evolution in vehicle safety. Discover more on the #STBlog: https://blog.st.com/safety-in-cabin-monitoring/
#39 (2025) Update: The STM32WBA5MMG module is here! STM32WBA54 and STM32WBA55, the 1st multi-protocol STM32WBA MCU
The STM32WBA5MMG, an ultra-low-power, small-form-factor, certified 2.4 GHz wireless module, is now available! It supports Bluetooth LE, Zigbee 3.0, OpenThread, as well as dynamic and static concurrent modes. 🔍 Discover more on the #STBlog: https://blog.st.com/stm32wba54-stm32wba55/
#38 (2025) Edge AI Foundation: powering the next wave of intelligence at the edge
STMicroelectronics is a Strategic Leader Sponsor of the Edge AI Foundation, a community of researchers, developers, business leaders, and policymakers committed to advance edge AI across sectors.🔍 Learn more on the #STBlog: https://blog.st.com/edge-ai-foundation/
#37 (2025) Power in Motion: how self-charging phones will quite literally put power in consumer’s hands
Over the past decade, smartphones have evolved far beyond their original purpose, integrating everything from complex applications to higher-quality cameras. Yet with each new capability comes the demand for more power – and with it, the need for more regular recharging.Discover more on the #STBlog: https://blog.st.com/power-in-motion-phones/
#36 (2025) Sensor + Test 2025: ST’s sensing solutions to empower industrial systems
At SENSOR+TEST 2025, we showcased edge-AI MEMS, ultra-low-power connectivity, and sustainability demos. The event welcomed around 5,000 visitors and more than 300 exhibitors from 24 nations, who featured solutions to make industrial systems cleaner, smarter, and more connected. 🔍 Discover more on the #STBlog: https://blog.st.com/sensor-test-2025/
#35 (2025) Lab-in-Fab 2.0: Expanded collaborations lead to innovation and transformation in piezoelectric MEMS
Advancing piezoelectric MEMS. ST announced the Lab-in-Fab 2.0, an expansion of the “Lab-in-Fab” initiative launched in 2020 that now includes new projects with Singapore’s A*STAR Institute of Materials Research and Engineering (A*STAR IMRE) and the National University of Singapore (NUS). 🔍 Discover more on the #STBlog: https://blog.st.com/lab-in-fab/
#34 (2025) Dracula Technologies: A printed organic photovoltaic module powering an STM32U0–What kind of sorcery is this?
How to power an STM32U0 using only a printed organic photovoltaic? This is possible thanks to the module from Dracula Technologies (ST Partner).🔍 Learn more on the #STBlog: https://blog.st.com/dracula/
#33 (2025) OverWatch and C3 Medical Device Consulting: a smart safety wearable for inmates, a healthier and safer solution for everyone
OverWatch is a smart safety bracelet for inmates and detainees developed by 4Sight Labs and the ST Partner C3 Medical. It includes an STM32L4 microcontroller, an LIS2DS12 accelerometer, and an ST25DV NFC tag. 🔍 Learn more on the #STBlog: https://blog.st.com/overwatch/
#32 (2025) LSM6DSV320X: 1st sensor to combine low-g and high-g accelerometers on the same die can detect up to ±320 g!
Sensing acceleration. The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g. 🔍 Discover more on the #STBlog: https://blog.st.com/lsm6dsv320x/
#31 (2025) Smart factories drive industrial efficiency with MEMS sensors
Smart factories are the driver of modern manufacturing. They combine Internet of Things (IoT), artificial intelligence (AI), and big data analytics technologies to create highly automated environments, leading to innovation, efficiency, productivity, and sustainability.Discover more on the #STBlog: https://blog.st.com/smart-factories-mems-sensors/
#30 (2025) STM32MP23x: the beating heart of industrial AI applications that fight cost constraints
Focusing power where it matters. ST announced the mass-market availability of the STM32MP23x (STM32MP235, STM32MP233, and STM32MP231) product line. 🔍 Discover more on the #STBlog: https://blog.st.com/stm32mp23x/
#29 (2025) Expanded STM32WL3x line tailored for metering, IoT sensors, and modem applications
💡ST launched the STM32WL3, a sub-GHz wireless microcontroller with a new ultra-low-power radio and an updated S2-LP transceiver featuring additional modulation support. It’s the MCU at the heart of new metering applications. 🔍 Discover more on the #STBlog: https://blog.st.com/stm32wl3/
#28 (2025) Peak Performance: how biosensors are transforming elite sports
Can biosensors refine elite athletic performance?Discover more on the #STBlog: https://blog.st.com/peak-performance-biosensors-sport/
#27 (2025) Collabora deploys machine vision with GStreamer on STM32MP2
💡 Collabora, member of ST Partner Program, developed a vision pipeline on STM32MP2. GStreamer captures, processes, and displays video, handling pre-processing, inference, and post-processing.🔍 Discover more on the #STBlog: https://blog.st.com/collabora-machine-vision-gstreamer-stm32mp2/
#26 (2025) Health on Hand: Biosensors’ role in the evolution of wearable tech
What if your watch could warn you about a health issue before the symptoms even show up? Biosensors are turning everyday wearables into medical-grade tools, offering real-time insights into heart, brain, and body health.Discover more on the #STBlog: https://blog.st.com/biosensors-wearable-tech/
#25 (2025) Proof of Life: The Rapid Evolution of Biosensors for Fitness, Health and Wellness
Biosensors are revolutionizing fitness, health, and wellness and are tracking everything from heart rate to hydration in real-time. Discover more on the #STBlog: https://blog.st.com/proof-of-life-biosensors/
#24 (2025) MEMS Studio 2.0: 3 software inspired 1 solution to make machine learning on sensors even more approachable
ST launched MEMS Studio 2.0, introducing new features, including authentication, transitioning to the JSON format for configuration files, and enhanced firmware management capabilities. 🔍 Discover more on the #STBlog: https://blog.st.com/mems-studio/
#23 (2025) STM32CubeProgrammer 2.20: Check out the new MCU features supported and a big welcome to Apple silicon
STM32CubeProgrammer 2.20 is the first version of the ST tool to natively support Apple silicon Macs, to offer Japanese and Chinese localization, and greatly improve incremental update programming.Discover more on the #STBlog: https://blog.st.com/stm32cubeprogrammer/
#22 (2025) Embedded World 2025: ST solutions to develop future-proof embedded designs
We were at Embedded World 2025! We showcased more than 45 demos in the following areas: STM32 MCUs, cybersecurity, RF connectivity, power and analog, edge AI, sensing, and automotive. 🔍 Discover more on the #STBlog: https://blog.st.com/embedded-world-2025/
#21 (2025) Safe By Design: How the EU’s latest safety regulations are reshaping the future of driving
Electric vehicle batteries need to be replaced when they reach less than 70% charge – posing a significant challenge for sustainability.Discover more on the #STBlog: https://blog.st.com/safety-design-driving/
#20 (2025) Update: New QSMP STM32MP25 and STM32MP13 SoMs from Ka-Ro, check out our mpu in a unique package
Ka-Ro, member of ST Partner Program, introduced new STM32 MPU SoM modules at Embedded World, which just took place. The QSMP-25 is their first module to include the STM32MP255. 🔍 Discover more on the #STBlog: https://blog.st.com/qsmp-stm32mp1/ #STAuthorizedPartner #STPartnerProgram
#19 (2025) OpenMV N6: The most powerful OpenMV camera module enables a whole new crop of machine vision applications thanks to the STM32N6
OpenMV has recently launched a Kickstarter campaign. The OpenMV N6 is the first python-powered machine vision module capable of running a Yolov8n image detection model at more than 30 frames per second, thanks to its STM32N6. #STAuthorizedPartner #STPartnerProgram 🔍 Discover more on the #STBlog: https://blog.st.com/openmv-n6/
#17 (2025) Life Extension: how innovation in battery management systems is assisting the re-purposing of EV batteries
Electric vehicle batteries need to be replaced when they reach less than 70% charge – posing a significant challenge for sustainability. Read more about how electric vehicle batteries are being repurposed in creative and innovative ways.Discover more on the #STBlog: https://blog.st.com/life-extension-battery-management/
#16 (2025) ST AIoT Craft 1.1, the first cloud solution for ST’s Machine Learning Core, now with expert mode and user privileges
Making AIoT ubiquitous. ST launched version 1.1 of ST AIoT Craft, the online tool that helps program ST MEMS sensors equipped with a machine learning core (MLC) to run inference operations just got more advanced. 🔍 Learn more on the #STBlog: https://blog.st.com/st-aiot-craft/
#15 (2025) Keeping it Real: the technology designed to erode the impact of counterfeit luxury goods
How to tell the real from the fake: #NFC’s are helping luxury brands and consumers spot the fake products.Discover more on the #STBlog: https://blog.st.com/technology-luxurygoods/
#14 (2025) STM32U3: The 1st STM32 with a 0.65 V VCORE is making near-threshold CMOS mainstream
A new benchmark in ultra-low-power applications. The STM32U3 is our first STM32 to use a sub-threshold design, which boosts efficiency by a factor of four compared to our previous generation. 🔍 Discover more on the #STBlog: https://blog.st.com/stm32u3/
#13 (2025) STM32WBA6, The new king of Matter- Bluetooth® LE single-chip applications
ST launched the STM32WBA6, our first device to allow the concomitant use of Bluetooth and 802.15.2 standards on a single chip, thanks to a bump in memory. 🔍 Discover more on the #STBlog: https://blog.st.com/stm32wba6/
#12 (2025) TouchGFX 4.25: new emulated framebuffer makes the “single chip” dream a reality
Taking less space in memory. TouchGFX 4.25 introduces an emulated framebuffer, which breaks the image to be displayed into chunks and uses a memory mapping technique that does away with the graphical RAM on the display itself. 🔍 Discover more on the #STBlog: https://blog.st.com/touchgfx/
#11 (2025) Update: Kinéis brings 9 satellites to STM32WL, time to make IoT in space popularUpdate: Kinéis brings 9 satellites to STM32WL, time to make IoT in space popular
A partnership with Kinéis, an Authorized ST Partner and a satellite operator, means that the STM32WL can now send messages into space, offering developers global coverage. 🔍 Discover more on the #STBlog: https://blog.st.com/kineis/
#10 (2025) TeseoVI: ST’s 1st single-die quad-band GNSS receiver makes autonomous driving mainstream
Our first single-die quad-band GNSS receiver. ST launched the TeseoVI which features anti-jamming and anti-spoofing technologies. 🔍 Discover more on the #STBlog: https://blog.st.com/teseovi/
#9 (2025) Eight semiconductor sector trends for 2025 (and beyond)
What are the top tech trends shaping our future? In our new #STPerspectives series, we explore key industry trends and the future of semiconductor technology.Discover more on the #STBlog: https://blog.st.com/eight-semiconductor-sector-trends/
#8 (2025) PIC100: ST’s 1st silicon photonics technology offers performance, efficiency, and a vision of what the future looks like in data centers
New efficiencies to data centers. The PIC100 is ST’s first photonic IC and one of the most efficient PICs on a 300 mm wafer, thus enabling 200 Gbps per lane and even greater bandwidth in the future.🔍 Discover more on the #STBlog: https://blog.st.com/pic100/
#7 (2025) STM32C09x and STM32C051: Even industrial applications now get one of the best price-per-performance ratio
A new era for the STM32C0 series. The STM32C09x provides FDCAN support for industrial appliances, while the STM32C051 offers a new price-per-performance ratio that will ensure even more teams adopt a 32-bit architecture. 🔍 Discover more on the STBlog
#6 (2025) STWA60N028T: ST’s 1st deep trench superjunction MOSFET leads efficiency benchmark
STWA60N028T, the first STMESH superjunction MOSFET to use a deep trench approach and to be manufactured on a 12-inch wafer. It features a low RDS(on) of 28 mΩ and supports a drain-source voltage (VDS of 600 V). 🔍 Discover more on the STBlog
#52 (2024) STSPIN32G0, 2 new low-voltage versions and already some design wins
The STSPIN32G0 is the first three-phase BLDC controller embedding an STM32G0 and a triple-half bridge gate driver capable of driving traditional power MOSFETs and IGBTs. 🔍 Discover more on the #STBlog: https://blog.st.com/stspin32g0/
#51 (2024) The hidden car revolution: zonal architecture
🚘 Check out the car of the future! What would need to take place in the unseen parts of the vehicle to make it a reality? The hidden car revolution is driven by the move to zonal architecture and software-defined vehicles. 🔍 Learn more on the #STBlog: https://blog.st.com/zonal-architecture/
#50 (2024) OpenSTLinux, the superpower of the STM32 MPU ecosystem or the making of a great Embedded Linux distro
OpenSTLinux, the superpower of STM32 MPU. We’ve been expanding it since its launch in 2019 with more packages, new distributions, and myriads of expansions.🔍 Discover more on the #STBlog: https://blog.st.com/openstlinux/
